Crypto analyst XForce revealed that Dogecoin Price It beats local highs following a $0.3 level of landfill. In line with this, he predicted that the meme coins could gather at the new All-Time High (ATH) and reach one psychological level.

Dogecoin Price Eyes 300% Rally to $1, breaking beyond local highs

in xPostXforce predicted that Dogecoin’s priced rallies can be recorded at a psychological level of one level. This came just as he noticed that Doge just broke on Previous Regional High After climbing over $0.3 on the weekend. Based on this, analysts declared that one dollar is still programmed for meme coins.

Related readings

Xforce admitted there’s a pullback along the way, but expects Dogecoin’s price to reach this one level in the end. Analysts also turned their attention to alternative ideas that could lead Doge to double-digit prices if continued as a strong impulse. His accompanying chart showed it Meme coins may be collected Up to $18.

Dogecoin prices rose over the weekend Rex-Soprey Doge ETFthis will be the first fund to provide institutional investors with exposure to first meme coins. It offers a bullish outlook for Memecoin and believes it can inject new fluidity into its ecosystem.

Additionally, the Fed plans to cut this week’s first rate this year. FOMC Meetingwhich could also be bullish on Dogecoin’s price as it increases risk-on sentiment. During this recent rally, Crypto analysts Mikybull Crypto has also been declared Meme coins reach $1 in this cycle. Meanwhile, Crypto analysts Ali Martinez pointed out That Doge can raise the next leg to $0.45 before integrating a bit around these levels.

Analysts issue Doge warnings

in xPostCrypto analyst Credibull Crypto issued a warning about Dogecoin prices, noting that it is currently in monthly supply. He said it more The doge has not eruptedthen technically, just retest the previous failure point.

Related readings

Credibull Crypto has been bullish on the Dogecoin price and said that the best time to jump into Longs is before this recent rally. Now he believes this is the time to be more cautious as it is the place where Doge is most likely to face rejection. Record the lower rank If the bottom is not yet in place. It could also cause memecoin to crash if Fed rate reductions and Doge ETF launches turn out to be “selling news” events.

At the time of writing, Dogecoin’s price is trading at around $0.28, down more than 2% over the past 24 hours. data From CoinMarketCap.

ISTOCK featured images, charts on tradingView.com

The amount of Ethereum waiting to enter staking has overtaken the volume queued for withdrawal for the first time since July, marking a key shift in network activity.

According to data from the Ethereum Validator Queue, the staking entry line reached 833,141 ETH (around $3.7 billion) on Sept. 4, surpassing the 819,757 ETH (roughly $3.6 billion) currently awaiting exit from staking pools.

Notably, this is the first time since July 22 that the entry requests have outpaced exits. Staking service provider Everstake also noted that the surge reflects the largest queues observed since 2023, when the Shanghai upgrade allowed staked ETH withdrawals.

The Crypto Investor Blueprint: A 5-Day Course On Bagholding, Insider Front-Runs, and Missing Alpha

The Crypto Investor Blueprint: A 5-Day Course On Bagholding, Insider Front-Runs, and Missing Alpha

Nice Your first lesson is on the way.

Please add [email protected] to your email whitelist.

As a result, ETH stakers must wait approximately 15 days before they can stake their assets on the chain.

Despite this shift, the total supply of staked ETH is expected to remain largely steady at above 36 million ETH because the entry and exit volumes nearly balance each other out.

Backtesting multiple markets at the same time has several benefits.

The short version is that you’ll save time and you can test based on market correlations.

This process will be similar to backtesting multiple timeframes at the same time, but will require a couple of additional setups.

Backtesting multiple markets is easy with an automated strategy.

Just run the trading program against data from different markets.

But viewing multiple markets at the same time is not as easy with manual testing.

In this quick tutorial I’ll give you the benefits and downsides of manual multiple market backtesting and exactly how to do it.

?

Benefits of Backtesting Multiple Markets Simultaneously

If you already know about the benefits of backtesting multiple markets, skip down to the section on setups.

But if you aren’t sure why you should do it, here are the top 2 reasons.

Save Time

First, testing multiple markets can save you a ton of time.

Let’s say that you want to manually backtest a trading strategy on the EURUSD and the S&P500 at the same time.

Furthermore, let’s say that testing each market individually will take you 2 days.

If you run both charts at the same time and take trades on both charts, it might only take 2.5 days to do your test instead of 4 days.

This is a huge benefit.

See Market Correlations

The other reason to backtest multiple markets at the same time is to see market correlations.

For example, a frequently talked about correlation is between the CADJPY and Oil.

Since Canada is a major oil exporter and Japan imports all of its oil, the price of oil can effect each economy accordingly.

As always, don’t take my word for it, backtest it yourself.

There are many other market dynamics at play with regard to currency prices, so the price of oil isn’t always going to be the biggest influence.

But if you want to test this, it can be tough to see the correlation (or lack thereof) if you are only backtesting one market at a time.

Having both charts side by side makes this easy.

Downsides of Backtesting Multiple Markets Simultaneously

Multiple market backtesting is not all sunshine and unicorns though.

Here’s what you should be aware of if you’re going to do this.

Loss of Focus

One potential downside is that you could miss some signals, if you have too many markets open at the same time.

So if you want to test on multiple markets, you have to be super focused.

It’s really easy to miss trades when you have several charts going at the same time.

I would suggest not testing more than 3 markets at the same time…max.

Two markets is ideal.

Computer Slow Down

If you have too many markets open at the same time, this can also slow down your computer.

Your trading program will have to update the data for each chart and also calculate your indicators (if you’re using any).

Depending on how powerful your computer is, and which backtesting software you’re using, this might slow things down.

So be sure that you have a decent computer and software that can handle this.

The most important spec on a computer is going to be the amount of RAM you have.

Processor speed does contribute to the overall speed, but as long as you have a processor made in the last 5 years, you’ll see way more gains from RAM.

At least 16GB is recommended, but 32 GB or more is ideal.

How to Setup a Backtest in Multiple Markets

Alright, now that you have some background on multi-market manual backtesting let’s get into actually how to do this.

I’ve personally done this with NakedMarkets and Forex Tester, but this will work in a similar way in other programs.

It’s not possible to do this in something like MetaTrader.

If your software cannot do this, I would highly suggest switching to NakedMarkets.

This software is much more optimized for multiple market backtesting than Forex Tester.

I’ll use NakedMarkets for the rest of this tutorial because that’s what I use.

Step 1: Download Historical Data

You’re going to need some data to test with, so the first step is to go to: Tools > Data Center and download historical data for the markets you want to test.

NakedMarkets provides updated historical data for free, no subscription needed.

Step 3: Setup the Backtest

Once the data is loaded, it’s time to add your charts and set them up.

Go to: File > New Backtest

Name your backtest and the starting balance for the account.

Then click Next.

The choose the markets you want to backtest. Be sure to select more than one market on this screen.

Click on Next.

Use the default settings on the last screen and click on Finish.

Now a window for each market will open.

Resize the windows to your liking.

If you need to add more windows, click on: File > Add New Chart and select the chart you want to add.

You’ll only be able to add markets that you selected when you created the backtest.

Keep in mind that you can also have multiple timeframes for each market.

Simply add another chart for each market, then change the timeframe of the second chart.

You can also change the timeframe of each chart by clicking on the chart you want to change, then clicking on the timeframe buttons in the upper left corner of the screen.

Once all of your charts are setup, it’s time to start backtesting!

Step 4: Press Play and Start Taking Trades

The hard part is done, now it’s time to start testing.

Press the play button in your software and it will advance all of your charts at the same speed.

Take trades according to your trading plan.

Step 5: Review Your Results

Once you’ve completed a full round of backtesting, it’s time to see how well you did.

A common mistake is to judge a trading strategy purely on its total return.

Professionals examine at all aspects of a strategy to identify its potential because most strategies won’t have good results on the first try. 

There are 3 main questions that you should ask yourself when reviewing your backtesting results:

• Can I possibly improve this strategy? This is usually possible when a strategy is near breakeven. Consider experimenting with your risk management or exits.
• Can I potentially trade this on different timeframes or in multiple markets at the same time? This can give you more trades, if lack of trades is your problem.
• Is the overall trend of account balance good? If your strategy wins consistently, but has a low overall return, then you might simply need to increase your risk.

Read more about how to optimize your strategies in this article.

Be willing to experiment with your strategy until you find something that works.

That’s the beauty of backtesting.

You’ll get a good idea of what works BEFORE you actually risk real money.

There is also a creative element, which makes it fun to try out new ideas that you come up with.

Conclusion

So that’s why and how to manually backtest your trading strategies in multiple markets at the same time.

If you’ve been testing one market at a time, this can be a game changer.

It will allow you to find profitable trading strategies and eliminate losers faster.

Happy testing!

PEPENODE reimagines how presales can work by giving participants something to do from day one.

Instead of buying tokens and waiting for the launch, you step into a fully interactive virtual mining simulator. Here, you can build your own server rooms, purchase Miner Nodes, upgrade facilities, and increase your hash power in real time.

The presale is already live at $0.001008 at the time of writing, and those who join now can get the $PEPENODE token at a low price. They can also stake their purchase immediately to start earning rewards.

The real hook is that your tokens are not just sitting idle. You can start putting them to work in a gamified mining environment before the token generation event.

Why This Presale Stands Out: How Mining Works on PEPENODE

Most presales are quiet. You buy in, then wait for weeks or months until the token launches. PEPENODE is different because it gives you something to do right away. Its off-chain mining game lets you start building your operation while the presale is still running.

You can watch your hash power grow, track rewards, and see upgrades happen in a live dashboard.

Early buyers also get a significant advantage. PEPENODE uses tiered node rewards, so the earlier you join, the more powerful your nodes will be. Stronger nodes mine faster and yield more rewards, giving you a head start before everything moves on-chain.

The mining game has two parts: Miner Nodes and facility upgrades. Nodes provide mining power, and upgrades enhance your setup’s speed and efficiency. The stronger your setup, the more you can earn.

It may look like a game, but your choices matter. Knowing when to upgrade and where to invest can increase your rewards before launch. The goal is to build the best setup so you are ready for the on-chain phase.

Tokenomics Built for Growth and Scarcity

More than 210 billion $PEPENODE tokens have been minted, with no private rounds or insider allocations. The distribution is aimed at building the ecosystem and rewarding the community.

35% of the supply goes to economics and treasury, funding business development and community events. 15% supports infrastructure, including marketing and operational scaling.

Node rewards account for 7.5%, fueling giveaways and staking incentives. Another 7.5% is reserved for growth and listings, covering liquidity and exchange costs. The final 35% is dedicated to protocol development, ensuring the mining system continues to evolve.

The project also has a strong deflationary mechanism. About 70% of all tokens spent on Miner Nodes and upgrades are permanently burned. This means that as more people participate, the supply decreases, potentially increasing scarcity over time.

PEPENODE Launch and Growth Plan

The launch plan is split into four phases.

Phase one is the presale itself, with the price currently at $0.001008. Users can now buy and stake immediately for passive rewards. Early staking rewards start above 20,000% APY. The mining game has also started, and there is a focus on community growth.

Phase two is the token generation event. This is the stage where tokens will become claimable through the PEPENODE website. There are also plans to list the $PEPENODE token on both decentralized and centralized exchanges.

Phase three moves mining on-chain. This includes NFT-based node upgrades, expanded facilities, and a global leaderboard with verified rewards.

Phase four brings meme coin integration and expansion. PEPE and FARTCOIN rewards are added, along with new node types, more boost mechanics, and influencer collaborations. A mobile dashboard will also make mining accessible from anywhere.

Security, Sustainability, and Referral Bonus

PEPENODE runs on Ethereum’s Proof-of-Stake network, which is far more energy-efficient than traditional mining. The platform also includes anti-bot measures that make it harder for automated systems to exploit the presale.

The 70% burn rate on upgrades ensures that as activity increases, the circulating supply drops. This could add a long-term sustainability element to the project’s economy.

PEPENODE’s rewards are designed to keep players active. Early buyers get stronger nodes, and staking during the presale can further boost your returns. There is also a 2% referral bonus on whatever your friends mine when they join through you.

There is a competitive side too. The leaderboard rewards top miners with extra $PEPENODE tokens and meme coins like PEPE and FARTCOIN. These fun bonuses make the game more exciting while still offering real value.

How to Buy PEPENODE in the Presale

Here is how to join: Start by funding a wallet like MetaMask or another compatible Web3 wallet. Visit the PEPENODE website and click ‘Buy’ or ‘Connect Wallet’. Choose the amount you want, and if you want to stake immediately, select the ‘Buy and Stake’ option.

If you prefer to pay with a card, connect your wallet first, then choose the card payment method to complete your purchase. From there, you can begin mining virtually the same day you join.

Visit the PEPENODE ecosystem: Website | Telegram | X (Twitter)

Meme cryptocurrency may soon be hot as their leader dogecoin

formed a golden cross, hinting at a huge price surge in the future.

A golden cross occurs with a simple moving average of 50 days (SMA) The price of the asset exceeds the 200-day SMA. The crossover shows that the short-term momentum is outweighing the long trajectory and could evolve into a major bull run.

Dogecoin averages bullished early today. Golden Cross is considered a positive indicator, but it has a complex record of predicting trends in most markets, including stocks, Bitcoin and Doge. This makes it less reliable as a standalone indicator.

That said, most of Doge’s previous big moves unfolded with the arrival of Golden Cross. For example, after the Golden Cross happened on November 6th, 2024, the price went from 130% to 46 cents in four weeks. Prices rose 25% in the four weeks since the average became bullish on November 22, 2023.

Similarly, a Golden Cross occurred in early November 2020, marking the start of a major four-month bull run, which saw prices rise above 1,000% in four months.

Let’s see if history repeats itself.

Read more: Sharp 7% Drop sends Doge to 22-cent support with a ton of selloffs